Antey house projects. Wooden houses. Insulation of a wooden house with Ecowool insulation

"Antey" is a good home for permanent residence. House area 95.52 sq.m. m., and its dimensions are 6 by 10. A distinctive feature of the house is the attic.

The construction company "SK Home" will be happy to build a house according to this project. The total cost of construction depends on the configuration. Please note - we can remodel the project for free or build a house according to any of your projects or sketches.

Construction costs may differ slightly from those posted on the website.

Equipment options

Complete set of frame houses

Foundation

Pile-screw

Tape

Sand cushion: 300 mm

Power frame

Frame strapping: timber 150*150 mm
Vertical racks made of chamber-dried planed boards (14-18% humidity), 1 grade, 150*50 mm
The pitch of the racks is no more than 580 mm, using a reinforced fastening system and additional protection of the frame from “cold bridges”
To protect the frame: outer side— four-layer diffusion membrane, the inner side is three-layer polyethylene film

Interior partitions

Vertical racks made of chamber-dried planed boards (14-18% humidity), 1st grade, 100*50 mm.
The frame posts are mounted on both sides with a vapor-permeable Izospan membrane.

Internal load-bearing walls and partitions

To protect the roofing system: the outer side is a four-layer diffusion membrane, the inner side is a three-layer polyethylene film.

Thermal insulation from environmentally friendly slab basalt insulation ROCKWOOL LIGHT BATTS or Paroc EXTRA

External walls - 3 layers (150 mm).
Interior partitions - 2 layers (100 mm)
Interfloor ceilings - 2 layers (100 mm)
Attic floor (second floor ceiling) - 3 layers (150 mm)

Roofing - metal tiles

Steel thickness: 0.5 mm
Assorted colors

Exterior facade decoration

(Egger/Kalevala, class E1)

Interior wall decoration

Moisture-resistant OSB-3 board, 2500*1250*9 mm

Window

Profile thickness 70mm
Fittings: ROTO NT

Complete set of block houses

Foundation

Sand cushion: 400 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

External and internal load-bearing walls

All wooden structures antiseptic in two layers, with a special fire-bio protective composition. Installation of the power frame of the house is carried out using a galvanized fastening system with double reinforcement.

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5 mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70 mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

Complete set of brick houses

Foundation

Tape monolithic heavily reinforced pile-grillage

Plinth height 600 mm, tape width 400 mm
Bored reinforced piles with a diameter of 200 mm, a depth of 2000 mm
Sand cushion: 400 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement and interfloor floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
First floor subfloor being installed

External and internal load-bearing walls

External load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
Internal load-bearing walls made of aerated concrete (gas silicate) blocks, 300 mm thick (possibly 375 mm). Density D500
Reinforcement of masonry every three rows
Aerated concrete (gas silicate) blocks are placed on a special masonry adhesive
Decorated window and door openings
Installation of brick reinforced belts under floors

All wooden structures are antiseptic in two layers with a special fire-bio protective composition. Installation of the power frame of the house is carried out using a galvanized fastening system with double reinforcement.

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5 mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
A four-layer diffusion membrane is used to protect the roofing system

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70 mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

Complete set of timber houses

Wall material to choose from

Solid timber

Advantages:

Affordable price
Wide use
Minimum delivery times
Easy to assemble at home

Flaws:

Additional costs for finishing or sharpening
Imperfect appearance
Additional costs for antiseptic
Increased cracking

Glued laminated timber

Advantages:

Excellent appearance
Very low shrinkage and shrinkage
Does not crack
Does not require additional processing

Flaws:

Increased price
Reduced vapor permeability of the material

Profiled timber

Advantages:

Great look
Making connections with overhangs (into the bowl)
Tighter connection between crowns and at corner joints

Flaws:

The need for a break for shrinkage
The appearance of cracks on the surface over time

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled concrete mixture M300
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
Reinforced interfloor joists are made from planed chamber-drying boards of grade 1, 50*200 mm (14-18% humidity), with a pitch of no more than 580 mm

External and internal load-bearing walls

External walls and gables made of timber 150*150 mm (possibly 200*200 mm)
Internal load-bearing walls made of timber 150*150 mm (possibly 200*200 mm)
Inter-crown insulation “jute fiber” or “flax wadding” is laid between the beams in 2 layers.
The corners of the house are assembled using the “warm corner” technology
Installation of timber crowns is carried out on a wooden dowel

All wooden structures are antiseptic in two layers with a special fire-bio protective composition. Installation of the power frame of the house is carried out using a galvanized fastening system with double reinforcement.

Roof

Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
Step-by-step lathing 100*25 mm
Temporary roofing material made of roofing felt is being installed

↓

Complete set of log houses

Wall material to choose from

Rounded (calibrated) log
Carriage (Norwegian cabin)
Planed log
Shaped log
Barked log

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Double waterproofing of the foundation is used.

Domokomplekt

Basement and interfloor ceilings

Reinforced basement floor joists are made of 50*200 mm boards, with a pitch of no more than 580 mm
Reinforced interfloor joists are made from planed chamber-drying boards of grade 1, 50*200 mm (14-18% humidity), with a pitch of no more than 580 mm

External and internal load-bearing walls

External walls and gables made of logs 240 mm (possibly 280 mm)
Internal load-bearing walls made of logs 240 mm (possibly 280 mm)
Inter-crown insulation “jute fiber” or “flax batting” is laid between the logs in 2 layers.
Dowels, sealing tape for sealing
Beams - treated with fire-bioprotective composition.

All wooden structures are antiseptic in two layers with a special fire-bio protective composition. Installation of the power frame of the house is carried out using a galvanized fastening system with double reinforcement.

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5 mm
Assorted colors
Reinforced rafter system made of boards 200*50 mm, grade 1, with a pitch of 580 mm
A four-layer diffusion membrane is used to protect the roofing system

Complete set of houses from SIP panels

Foundation

Pile-screw

VS-108/300/2500mm, TU 5260-001-84045723-2011
Piles are driven using special equipment
Pile wall thickness 4 mm, blade thickness 5 mm
Inside the piles are filled with M300 concrete mixture
The metal head is welded, 200*200 mm
The pile is covered with a 2-component factory protective compound

Tape

Plinth height 600 mm, tape width 300 mm
Sand cushion: 300 mm
High-strength reinforcement d12 mm class AIII
Factory-made concrete, grade M300 (B22.5)

Thermal insulation

External walls - non-flammable polystyrene foam (150 mm)
Interior partitions - environmentally friendly slab basalt insulation (100 mm)
The floor of the first floor is non-flammable polystyrene foam (150 mm)
Attic floor (second floor ceiling) - environmentally friendly slab basalt insulation (100 mm)

Roofing - metal tiles

Covering: polyester, with a quality guarantee of 15 years
First galvanizing class – 275 g/sq.m
Steel thickness: 0.5 mm
Assorted colors

Exterior facade decoration

Ventilated facade: counter-lattice made of timber 35*35 mm
Painted galvanized ebbs are mounted on the base along the outer perimeter

Interior wall decoration

Moisture-resistant OSB-3 board, 2500*1250*9 mm

Window

REHAU SIB-Design PVC window structures, standard sizes
Profile thickness 70mm
2-chamber double-glazed window (3 glasses), 5-chamber profile (white), mosquito nets
Fittings: ROTO NT

“Double timber” is a perfect construction technology wooden houses. Technology allows as soon as possible build a house made of wood - very warm, environmentally friendly and not subject to shrinkage.

Foundation on screw piles

Geodetic works (alignment of axes, leveling);
Express soil geology;
Installation works of screw piles;
Screw piles h=2500 mm, d=108 mm;
Installation of a strapping grillage with a cross-section of 150*340 mm with antiseptic treatment;
Waterproofing of pile heads with Stekloizol.

Wall kit

A set of walls made in a factory from planed profiled timber, chamber dried (humidity 12%-14%);
Tongue-and-groove system in a vertical connection, branded double lock, specialized metal fasteners;
Construction of a system of interfloor ceilings: 1st floor - transport moisture beam with a cross-section of 50*200 mm, specialized metal fasteners, 2nd floor: profiled wooden chamber-drying panels integrated into the walls with a cross-section of 45*270 mm, specialized metal fasteners;
Installation of the bottom sheathing (transport moisture board 25 mm thick);
Installation of insulating film membranes (preparation for insulation with high density insulation);
Antiseptic treatment of logs, beams, sheathing.

Roof

Construction of a rafter system (transport humidity beams 200 mm high, specialized metal fasteners);
Installation of double sheathing (transport moisture board 25 mm thick);
Distance slats (transport moisture beam with a cross-section of 50*50 mm) to ensure roof ventilation;
Installation of insulating film membranes;
Flooring roofing material"Profile" C21 with a polymer coating with additional roofing elements (ridge, end, eaves strips);
Antiseptic treatment of rafters, sheathing, spacer strips.

Insulation of a wooden house with Ecowool insulation

Insulation of walls, partitions, gables (thickness 130 mm, unique resistance to heat transfer, unsurpassed sound insulation);
Roof insulation (thickness 200 mm);
Floor insulation (thickness 200 mm).

Antiseptic treatment

Treatment of a wooden house (walls, partitions, gables - interior, facade) with a complex wood-protective compound "Lignofix" (Czech Republic) manually in 1 layer.

Construction of wooden houses for permanent and seasonal residence is one of the main activities of the Antey company. We build them from premium profiled timber, as well as using frame technology.

Our Building company offers clients warm, environmentally friendly, reliable and durable buildings of any configuration, layout and size. They can be built according to standard projects, examples of which are presented on the website, or according to individual ones, developed taking into account all the wishes of customers!

The main advantages of wooden houses

Housing made of wood - clean natural material, erected in a short time, perfectly retains heat in winter and protects from heat in summer. It will provide maximum living comfort, will last for decades and, which is also very important, is quite affordable for people even with low incomes.

Let's list a few more “advantages” of turnkey wooden houses:

High energy-saving characteristics - wood has a low thermal conductivity coefficient.
Environmental safety - buildings made from materials created by nature itself do not emit substances harmful to the human body.
Durability and reliability - buildings made of wood with proper care will last 50 years or more.
Good sound insulation of rooms - due to the properties of wood fibers to absorb sound waves.
Aesthetic appearance - each type of wood has a unique cut structure and natural shade.

Turnkey wooden houses from the Antey company: reasonable prices and comfortable cooperation

Since 2011, our company has been building houses, dachas and cottages made of wood for residents of Tula and Kaluga. favorable conditions. Cooperating with us is not only economically feasible, but also very convenient! After all, comfortable housing can be purchased with a minimum advance payment, with installment payments for different periods, by taking out a bank loan, for maternity capital. The last option will be especially interesting for young families with children.

So why wait 10 - 15 years until the required amount for construction is accumulated, if you can buy a wooden house from us and the whole family will enjoy its warmth and cozy atmosphere after just a few months! Moreover, the acquisition of such real estate has many advantages compared to residential buildings made from other materials.

Why is it worth ordering and buying a wooden house from us:

permanent staff of engineers, architects, foremen, craftsmen, workers (more than 100 people) with experience and high qualifications;
own production lumber for modern equipment;
availability of a fleet of trucks and special equipment necessary for delivery of materials to the site and construction;
perfect combination High Quality wooden houses and attractive prices;
a large selection of standard and development of individual projects of any complexity, their implementation in the shortest possible time;
conclusion of a formal contract and provision of a guarantee for up to 10 years.

We work conscientiously - turnkey wooden houses, created by the skillful hands of our craftsmen, will delight you with reliability and attractive appearance, a warm and cozy atmosphere for decades!

1st floor

2nd floor

FACADES

EQUIPMENT
HOUSE CONSTRUCTION

1

FOUNDATION

Monolithic strip foundation on a supporting base

Support sole: h=300 mm, b=800 mm

Foundation wall: h=1,050 mm, b= 350 mm

The foundation is taken as average. This design is not a guarantee of sufficiency on your site, since in order to determine the design of the foundation, it is necessary to calculate it in accordance with current standards and joint venture, which can only be done with the results of engineering and geological surveys on your site.

Shallow strip foundation

Deep strip foundation

Monolithic reinforced concrete slab

Bored piles with grillage

1

CONSTRUCTION OF EXTERNAL AND load-bearing walls

Construction of walls from aerated concrete blocks:

Installation of waterproofing, laying of aerated concrete blocks 300 (375 mm), reinforcement of the first and every fourth row with reinforcement in accordance with the specifications, construction of reinforced belts and lintels. Construction of internal load-bearing walls from aerated concrete blocks (100 mm, 150 mm, 250 mm depending on the project requirements).

Possible wall kit options:

Construction of walls from ceramic blocks.

Construction of walls made of ceramic or silicate bricks.

Installation of reinforced concrete lintels in window and door openings of external and internal load-bearing walls (AIII d12 reinforcement, concrete); installation of monolithic armored belts (AIII d12 reinforcement, concrete).

1

FLOORS DEVICE

Lightweight monolithic reinforced concrete slab 200 mm

Possible foundation options:

Reinforced concrete hollow slabs,

Prefabricated monolithic structure,

Wooden beams.

1

ROOF DEVICE

Installation of an attic rafter system covered with metal tiles with insulation mineral wool 200 mm, antiseptic treatment of wooden elements, installation of vapor barrier and wind-moisture barrier film.

Possible roof finishing options:

Soft bituminous shingles over a continuous OSB covering.

Natural cement-sand tiles.

Natural ceramic tiles.

1

FACADE FINISHING

Plaster on polystyrene foam using CERESIT technology Germany;

Exterior finishing with facing bricks.

“Antey 2” is an expanded version of the “Antey” project: here the changes affected mainly the internal space, in the external appearance only the color scheme of the decorative elements has changed. In this version of the project, the garage has been replaced with a bedroom with a separate bathroom. The kitchen-dining room has become more spacious and more atmospheric due to the fireplace; a storage room and laundry room have also been added. All other premises remained unchanged. This house is perfect for a large family that values comfort, harmony and coziness, and wants to spend as much time as possible together.

Leave a request for a project

Project composition

The project consists of 2 sections (architectural and structural) intended for capital construction. The engineering solutions section must be ordered separately.

Project adjustment

At your request, we can make the necessary corrections and additions to the house project - free of charge.

Buy a house project

Send us a request and all the necessary information with the price will be sent to you by email or our specialist will call you back.

Bonus

When you sign a contract to build a house in our company, the design of an individual house is given to you as a gift.

Guarantee

After completion of construction, all structural and load-bearing elements of the house are guaranteed for 5 years.

We also recommend