Lightweight earrings made of polymer clay. DIY polymer clay jewelry. Brief instructions for working with plastic

Polymer clay is an excellent material for crafts that even a beginner can handle. Its most popular use is in jewelry.

If you want to make out polymer clay earrings, first decide what type of earrings you need - regular “pendants” or studs (“studs”).

Before baking, pins or pins with a round end are inserted into the main parts of ordinary earrings (you can twist it into a ring yourself using pliers, you can buy a ready-made one, but then you will have to carefully measure the length of the entire pin, because it will not be possible to cut off the excess from above with wire cutters, loop will also be damaged).

The accessories of studs are most often attached to the product itself using superglue.

In other words, in order to make any earrings from polymer clay (for example, like in the photo), you will need the following set:

the polymer clay itself in the colors you need;
pins, pins or accessories for studs, earrings;
connecting rings;
round nose pliers and pliers;
sharp knife;
Super glue;
stove with oven.

You may also find special tools for working with polymer clay very useful (like, for example, a paste machine that “connects” the clay different colors and rolling it out to layers of the required thinness, or various metal stacks). But a beginner, most likely, will not have them on hand.

Stacks are easily replaced with sticks, toothpicks and any objects that can apply the desired texture; instead of the same machine they often use a rolling pin, and so on.

Before baking the clay, be sure to look at the packaging - it says at what temperature it should be done and for how long. These parameters are different for each type of clay.

Finished products are often coated with polymer clay varnish - this way they will retain their brightness longer; Depending on the varnish, you can make the surface glossy or matte.

Polymer clay earrings: ideas

Fruits, vegetables and sweets made of polymer clay: pictures

Fashionable idea for long earrings. Take a sample of some fruit or vegetable (apple, pumpkin, pineapple) or sweet (triangular pieces of cakes or pastries are especially popular) and sculpt its likeness from polymer clay to scale (the product should be approximately the size of the phalanx of the little finger).

Using a toothpick, apply texture (press “slices” on a pumpkin, for example). Secure the pin in the “stem”, hide the joint with green clay, simulating the actual stem, and bake.

Then cut off the excess part of the pin with wire cutters, bend the end with round nose pliers and attach it to the hook using a connecting ring. You can decorate such earrings with various additional elements - for example, by hanging the product on a chain that is already attached to the earring, or by adding a small metal bead on top, or a leaf “printed” on clay from the present.

Leaves

“Imprinting” a leaf on clay is very simple - form a leaf from green clay and attach it to a special mold. If there is no mold, you can either draw all the veins with the same toothpick, or, if you need more photographic accuracy, press the leaf against a real leaf from the tree (although the print will be less clear).

"Old" beads: video

You can apply any texture of your choice to the surface of the clay; for example, earrings made of long ethnic beads rolled into a “roll” that is not completely closed look very extravagant. Roll out some clay, fold it however you like, and press grains of salt firmly into it (as many as possible). Bake with it, and then dissolve the salt with water.

How to level the floor? Palm tree plastic bottle do it yourself - photos, videos how to make

Material such as polymer clay began to be used recently, but many craftsmen have fallen in love with it. Jewelry made from this material looks great and is easy to create. Working with polymer clay is quite easy, it is flexible and easy to shape. the required form. Once it dries it becomes hard like plastic and looks great.

Each person can master several modeling techniques and create masterpieces. You can make a huge variety of things from it - from luxurious jewelry to toys for children. The main thing is to show imagination and try to make various products from polymer clay, after watching the master class.

Working with polymer clay

Many companies produce polymer material for sale, so the price and appearance it varies. If you are a beginner and are not confident in your abilities, you should not immediately purchase expensive polymer clay. Buy basic colors and try to create simple jewelry from polymer clay, the master class will help you with this. As you work, you will understand how colors are mixed and what combinations can be obtained.

You can make amazing jewelry from polymer clay with your own hands. In order to make them, you need to use the following five techniques.

Treatment

Polymer clay must first be processed and softened. Therefore, it must be warmed, kneaded with your hands, and then smoothed until it is thin enough to pass through a special machine. Folding and passing polymer clay through a machine helps prepare the material for later use.

If you don't have a machine, you can process the polymer clay by hand by folding it and straightening it several times. You can heat the clay with a hairdryer or heat lamp to loosen it and make it pliable.

Forming the color

One of the most attractive features of polymer clay is the color. It comes in a huge variety of colors and can be mixed with an unlimited variety of colors. So mix colors to get the one you want. You can even imitate expensive materials if you learn how to mix colors correctly.

Shaping

You can carve the clay, ruffle it, weave it, flatten it, fold it, texture it, stamp it, etc. Ceramic tiles and wax paper are ideal surfaces for working with polymer clay. One of the most creative methods of polymerizing clay is caning, which creates structures by rolling logs of different colors of clay and arranging them in a specific way.

Baking

In order for the clay product to harden and your creation to be preserved, you must bake it in a special toaster for clay. This will be one of your most important polymer clay tools.

Bake the clay on parchment paper, cardboard, or ceramic tiles. Please note that curing the clay directly onto the metal will create shiny spots on it. First you need to preheat the oven to 12o degrees, and then bake the polymer clay pieces for 30-60 minutes between 121 and 129 degrees.

Note: Polymer clay may melt or release toxic fumes if the temperature exceeds 130 degrees. Make sure you have a good thermometer (don't rely on the oven setting and keep a close eye on it). Also, always work in a well-ventilated area.

Finishing

After your ceramic clay jewelry will be released and cooled, they can be finished to make them look even more attractive. You can sand it down with sandpaper or a sanding sponge and coat it with a thin layer of varnish or clear sealant to protect its surface or add shine. You can highlight certain areas as you wish.

In addition to polymer clay, you will need other tools. However, to begin with, you can make things from just polymer clay and use any available tools available in your home. They can go regular knife cutting tools, paper clips, toothpicks, rubber cooking molds and anything with an interesting texture.

Try baking a piece of polymer clay and see how it behaves. If it has changed color or cracks have formed on it, then its quality is not very good. When heating in an oven, follow the instructions written on the box.

Wear medical gloves to avoid getting dirty. The surface you are sculpting on must also be clean.

We present to your attention crafts made from polymer clay; this master class will help you, especially if you are new to this. All of them can be made only by hand, using your oven, as well as using any everyday items that you use in your normal life.

Polymer clay necklace

A material such as polymer clay is perfect for making jewelry; this master class will help you make a necklace.

What you will need: polymer clay of any colors, waxed cotton cord, toothpick.

Start by warming the clay between your hands until it becomes soft and pliable. Take a small piece of clay, roll out the beads, and then make small balls with your palm. You can make them as big or small as you like.

Use a toothpick to make a hole in the center of each ball. If the clay you are using is soft, it is better to wear latex gloves. Place your beads on a baking sheet and bake according to the directions on the box.

Thread the beads onto the cotton cord. This is where you can get creative. You can place all the beads on one strand or make a bunch of necklaces and stack them. All this is at your discretion! Attach a magnetic clasp so they can be opened and closed.

Polymer clay bracelet

What you will need: polymer clay, razor blade. Mix the clay with your hands to soften it. Roll three long tubes using your palms. Place 3 sticks together and start braiding.

Weave a bracelet of the length you need, focusing on your wrist. You can cut off the rest with a razor. Connect the two ends together carefully so that you form a continuous circle.

Bake for 25 minutes at 245 degrees. You can make more than one bracelet, but several, it will look quite beautiful.

DIY earrings

Make these beautiful polymer clay earrings for yourself and your friends. They can be a wonderful gift for anyone.

Consumables: polymer clay, earrings, glue, acrylic paints.

Progress:

Work the clay first until it feels nice and soft to the touch.
Form a heart using the end of a needle or toothpick.
Bake the hearts according to package directions.
Once your figures have cooled, you can paint them. acrylic paint. After the earrings are dry, take glue and glue them to the earrings. It will look quite cute and will become one of your favorite decorations.

Decoration with a bow

What is necessary:

polymer clay;
cutter;
spring rings;
pliers;
clasp;
chain;
oven;
pencil;
pin.

It's very simple. Follow these steps:

It is best to work with clay on wax paper so that the surface does not get dirty. Wrinkle the material until it becomes soft and pliable. Shape a long stick into a log and divide into four. Take each one and smooth it out until it is flat.

Pinch the sides as shown in the picture and then join them together. Clamp all the parts in this way and connect them together. Be careful not to ruin the folds!

Then take some clay, roll it up and wrap it around the middle of the bow. Trim off the excess and smooth it out a bit. That's all - the beautiful bow is ready.
Place a pencil inside the bow to give it a nice shape.

Bake the clay according to package directions. Attach the jumping rings and necklace chains are done!

This is a summer or spring decoration, but it can decorate any outfit, regardless of the season.

The options are endless, you can make a ring if you attach it to a base or a pair of earrings. Attach them to your phone case to decorate it.

Headband with horns

It looks funny, and it's fashionable now to wear a headband with horns.

To make such a headband, you first need to choose the color of your polymer clay. You will need at least one block of polymer clay, or more if you want to make large antlers.

Divide the block in half, remember it a little, and then sculpt two shapes into a cylinder. Pinch the top pieces and form them into a cone shape.

Take a wooden dowel (or pencil) and punch holes through them. Bake polymer clay according to package directions.

Cut a piece of ribbon that can be tied around the head. Thread the ribbon through the holes and make knots on both sides of the cone.

Tie the ribbon on your head so that the horns fit well on your head. Now you can go to any party to captivate others with your appearance.

Earrings “Friendly Monsters”

What you will need: Various colors of polymer clay, toothpick, sharp blade, ring, brush (optional), pink chalk pastel (optional).

Instructions:

Cover the earring mold with clay as shown.
To form the eye, place a small circle in the middle of the monster's forehead. Add a smaller portion of green and then a smaller portion of black on top of the green.
Add cones if necessary.
Using a sharp blade, cut a slit to form a mouth.
Use a toothpick to smooth out your mouth.
Take a piece pink clay and form a small tongue.
Make a depression in the middle of the tongue with a toothpick.
Use a brush to apply some of the chalk pastel to the monsters' cheeks (optional).
Bake according to package instructions.

All is ready! Make as many little friends as you like and have fun! Cute monsters are fun and easy to make.

Polymer clay ring

You can also make a ring from polymer clay. To do this, you can take a ready-made mold or shape it with your hands.

Neither if you make a solid ring, it is better to use a special silicone mold– Mold. You will need to bake it in a mold and then sand and varnish it.

If there is no mold, then you will need to purchase a base, which is usually available in stores that sell accessories for making jewelry. They already have provisions for attaching plastic, so you will have to form it yourself from polymer clay. You choose any design according to your preference.

Don't be afraid to mix colors and get interesting combinations. Create and receive wonderful jewelry worthy of admiration.

I bring to your attention a master class on making beautiful earrings with roses.

These polymer clay earrings are very easy to make and can be a wonderful gift.

To create them we will need:

polymer clay;
toothpicks;
pins with loop;
accessories for earrings (earrings, rings);
thin-nosed pliers, round-nose pliers.

First, let's make three roses for each earring. You can see how to sculpt roses. Instead of a pin, we sculpt flowers on a toothpick, two large flowers, two medium ones and two small ones. When the flower is ready, carefully cut off the bottom part with a knife.

Now we take the pins with the loop, apply them to the back side of the flower, and cover them with a small piece of plastic.

We send it to bake in the oven at the temperature indicated on the packaging of your plastic.

After baking, cut off the protruding part of the pins to make them shorter, and use round pliers to twist them into rings.

Now let's make the leaves. To do this, take green plastic, knead it well, roll it into a rope and cut it into pieces. From each piece we form a drop and flatten it between our fingers. Using stacks, we shape the leaf, make a hole for the fittings and pinch the tip of the leaf with your fingers. We bake the finished leaves in the oven.

After baking, we prepare the accessories for the earrings and begin assembling.

Using rings, we connect the roses together and attach the earrings.

Now we attach the leaves using rings. We attach one leaf to a large rose, and three leaves to each link between the roses.

You get such beautiful earrings! With them you can create an interesting look for a holiday or for a photo shoot.

The second option is a winter night

These polymer clay earrings are easy to make, but in the end they turn out very beautiful.

For production we will need:

blue plastic;
stationery knife;
clay roller or pasta machine;
toothpicks;
ultra-fine blue glitters;
brush;
needle nose pliers;
accessories for jewelry (rings, earrings).

Take a piece of plastic, knead it well and roll it out into a layer approximately 2 mm thick.

Using a knife, cut the resulting layer into squares of different sizes. The largest are approximately 9 mm (8 pcs), the next are 8 mm (8 pcs) and 6 mm (8 pcs) and the smallest are 4 mm (14 pcs).

Now let's take the glitter. I used ultra-fine glitters that I once bought for manicures. Dip the brush into glitter and rub glitter into every detail. Excess glitter is easily brushed off and does not fall off when using the earrings for a long time. We do the same with the reverse side..

Using a toothpick, carefully make holes in the squares for the rings. In two small ones we make two holes from opposite corners.

Now we can send the parts to bake in the oven.

After baking, we begin collecting earrings. Let's prepare thin-nose pliers, rings, earrings and our squares.

To make it easier for us to assemble the earrings, we arrange the squares in order. First large, then descending. It turns out 4 pieces of a certain size for each earring. The smallest ones are 6 pcs.

Using thin-nose pliers, we thread small rings into each part. From slightly larger rings we assemble two chains of 5 links.

Now we take small rings and use them to connect 4 large squares to the bottom link of the chain.

In the same way, we attach 4 smaller squares to the next link, then 4 more to the next link, and 3 smallest ones to the remaining ones. It turns out that this is the preparation.

Now we connect a square with two holes using a ring on one side to the workpiece, and on the other side to a hook.

We assemble the second earring in the same way.

As a result, we get such beautiful and shimmering earrings.

There are several stages of working with polymer clay. If you do everything correctly, according to the instructions, then you will get very good results. original jewelry: beads or earrings made of polymer clay, pendants, bracelets, flowers made of polymer clay, hand-made hair ornaments etc.

On the Internet you can find many lessons on working with polymer clay for beginners, as well as master classes on polymer clay for needlewomen with different skill levels.

We offer you several lessons and master classes on modeling from polymer clay.

Master class: how to make a flower from polymer clay for earrings

This lesson shows in detail how to make rose earrings from polymer clay with your own hands. Everything is not as difficult as it seems. These earrings will suit various outfits in your wardrobe.

Master class: cake earrings

Master class: Dragonfly brooch made of polymer clay

Polymer clay pendant with Swarovski crystals

Master class: making beads from polymer clay

Brief instructions for working with plastic:

1 Preparing the workplace. Everything you need for your work should be at your fingertips: a knife or blade, a glass surface, a baking dish, templates, toothpicks, a roller for rolling, varnish, accessories, etc.

2 Select polymer clay, select the desired colors, knead the clay well. It must be kneaded like plasticine to make it soft, elastic, and remove excess air from it, because after baking, air bubbles inside the product create uneven bumps on the surface.

3 The clay is cut into pieces necessary for making the product, sausages and balls are molded, and colors are mixed.

4 When your pieces are ready, they should go into the oven. Typically, products baked at a temperature of 110-130 degrees for 15-20 minutes. Carefully read the instructions on the plastic packaging and strictly follow the recommendations on the packaging. Do not exceed the temperature and do not overcook the products in the oven.

There is another method besides baking - boiling the product. To do this, take dishes that you will not use for food purposes and cook the preparations in boiling water. However, remember that not every type of clay can be boiled. Read the packaging carefully. At the same time, baked products are more reliable and durable than welded ones.

5 If the temperature or baking time is exceeded, the product may begin to release toxic poison and burn. If this does happen, thoroughly ventilate the room and wash the oven. Do not bake products in containers that will subsequently come into contact with food.

6 After cooling, the workpiece should be varnished and bonding should begin.

Good luck in making your own jewelry and unlimited flights of imagination!

Information for beginners

What is polymer clay?

Not everyone knows what it is, but, of course, many have heard it. Polymer clay is a soft material, very similar in consistency to plasticine. But once such products are heated, they acquire the strength of real plastic. The basis of this clay is polyvinyl chloride (PVC). Clay is also called plastic or plastic.

Where can you buy polymer clay and jewelry made from it?

Buying polymer clay is not that difficult these days. It is usually sold in art salons and similar stores and boutiques. It will be even easier to purchase it online. In many online stores, polymer clay is presented in a wide range. Products self made can also be purchased online. The choice is simply enormous.

Clay jewelry can be universal or suitable for a specific outfit. The theme of the jewelry depends only on the imagination of the needlewoman. By the way, modeling from polymer clay is not such a difficult task. All you need to do is carefully study jewelry making technology from it, and you will also need a little patience, time and imagination.

How to choose polymer clay?

There are many types of polymer clay. It’s not at all easy for a beginner to understand them. But with desire and persistence, nothing is impossible.

Polymer clay comes in different grades, e.g. imported “Fimo”, “Cernit” and “Sculpey” or domestic “Tsvetik”, “Sonnet”, “Hobby”, “Lapsi”, “Artifact”. The advantage of domestic ones is that they are more low price. And the above imported brands of clay are considered the most convenient to work with, because clay domestic brands not so plastic, it can crumble, but finished goods are not as durable. This one is perfect polymer clay for beginners, as well as for those who want to experiment. More information about different types You can find out about clay on thematic Internet resources, as well as on handicraft forums.

Each specific brand of clay has its own characteristics. Firstly, this is the color palette, and secondly, a certain polymerization (hardening) temperature. The range of many manufacturing companies is also surprising. Some manufacturers make clay for the production of dolls, others make translucent clay, clay that glows in ultraviolet light, with sparkles, mother-of-pearl shimmer, etc. Clay that glows in ultraviolet light makes excellent jewelry for girls who love club life.

What you need to sculpt jewelry from polymer clay

You need to think about your work surface. It is best if it is a ceramic tile with a glossy surface or a piece of glass. The surface must be durable, since during manufacturing DIY plastic jewelry you will be working with a knife and the surface should not be damaged. Workplace should be smooth so that the clay does not stick.

Next, an important tool when working with clay is a thin, sharp knife, such as a stationery knife, or a regular blade. The smaller the products and parts you make, the sharper and thinner the knife you will need. You should also take care of the tool you will use to roll out the plastic. This may be a special video designed for this purpose.

The product must be baked at high temperature. A regular home oven is ideal for this. You can set the desired baking temperature. For baking, you will need a heat-resistant plate or a special baking sheet, which will be intended only for this. This utensil cannot be used for food afterwards. A metal baking sheet should be covered with parchment paper to prevent the products from burning.

What else is needed to make jewelry from polymer clay?

For more experienced needlewomen, you will need some more products and materials for creativity. Sandpaper different numbers to remove fingerprints and irregularities from the surface of the jewelry, a special cloth to polish the accessory, as well as varnish that makes the product shiny and more durable and durable.

Some stores offer special varnishes for plastic from different companies, the most popular of which is Fimo varnish. If it is very difficult to find such varnish in your city, then you can use ordinary water-based acrylic varnish for these purposes, which is sold in construction stores.

You also cannot do without special accessories for the jewelry itself: chains, locks, earrings, threads, ribbons, magnets, elastic bands. If you want to do it yourself polymer clay earrings, then you will definitely need earrings - curved arms with a loop on which the earring is attached. Such accessories can be found both on the Internet and in sewing stores and other accessories stores.

On the next page you will read instructions on techniques for working with polymer clay, and also see several video lessons and master classes on making earrings, brooches, beads, and so on.

Jewelry made from polymer clay is gaining popularity every day. And this is not at all surprising, because you can make them yourself and that’s it. necessary materials available for sale. And thanks to various types of coatings and color mixing techniques, you can easily imitate absolutely any materials and create the most complex and bizarre shapes. We offer the following ideas for earrings made of polymer clay.

Polymer clay for beginners - earrings

First, let's look at the simplest of lessons on creating earrings from polymer clay. For work we will need clay of red, green and beige colors. Also a knife and a machine for rolling clay into a plate.

Beautiful earrings made of polymer clay

Now let's look at a more painstaking procedure for making earrings from polymer clay, which a beginner can also master. Among all the polymer clay earring ideas, this one is the most creative.

Polymer clay earrings - flowers

Floral themes are in great demand. But making buds will require certain skills. We offer a master class for making earrings from polymer clay, using the casting method.

Roll out the clay of the chosen color on a machine.
First, using a mold, we cut pieces without texture.

Next, cut off a small piece and place it on a special plastic sheet with a picture of flowers. Roll it out a little and get a picture. Next, use a cookie cutter to cut out a circle.
Accessories for making brooches or buttons will help to give it a slightly curved shape. They can be purchased at a craft store.

Place the blanks with the pattern and press down.
If desired, you can apply a layer of paint or add color transitions.
We will bake directly on metal buttons.
Next, apply a layer of liquid clay.

We put fasteners for earring fittings on it. We fix it on top with a blank without a pattern.
The “raw” layer will protrude a little, so trim it with a knife.