Quick installation, commissioning and maintenance of the Buderus Logano G234X boiler

Buderus Logano G234 60 kW- heating boiler equipped with atmospheric gas burner with pre-mixing. It is an ideal choice for heating large buildings. With its help, you can very economically organize the supply of heat in situations where you need high power. In combination with a cylinder water heater, it is easy to implement a comfortable hot water supply system.

The principle of atmospheric combustion is as follows: gas is automatically supplied to the burner along with the atmospheric air necessary for combustion. In this case, you do not need to use an electric fan, as in other heating boilers. Since the fuel is burned in separate flames, the flame does not come into contact with the burner tube, it does not heat up and will therefore last longer.

Buderus Logano G234 60 kW - hydraulic circuits using boiler combinations with various burners and control systems:

Logamatic 2107: single-stage burner – water heater tank – circulation pump. Complete with FM 241: heating circuit with mixer. Complete set with FM 242: 2 two-stage or modulating burner. Complete set with FM 244: solar collector.
Logamatic 4211: single, two-stage or modulating burner - water heater tank - circulation pump. Complete with FM 442: two heating circuits with mixer. Complete with FM 445: system with external heat exchanger. Complete with FM 443: solar collector module. Complete set with FM 446: EIB interface single electronic system home management. Equipped with FM 448: general fault message.
Logamatic 2101 (operation mode with constant boiler water temperature): single-stage burner.

Buderus Logano G234 60 kW - advantages of a low-temperature gas boiler:

Ionization flame control and double magnetic valve;
Low level of emissions of harmful substances;
Low noise operation;
Compact dimensions and the ability to install the water heater to the right or left of the boiler;
High efficiency (up to 93%), thanks to the intense heat transfer of the heating surfaces of the cast iron heat exchanger;
Simplicity of installation and service;
Reliability and durability of the boiler design, made of gray cast iron;
Ease of combining and selecting control systems and water heater tanks from the Buderus program;
Highly effective thermal insulation;
There are no restrictions on the minimum boiler water temperature.

Buderus Logano G234 60 kW - boiler purpose:

Can be used to heat buildings up to 600 m2, satisfying average heat needs. With additional equipment, the boiler can be connected to the DHW circuit.

Heating devices with a power of 60 kW are ideal for heating a country cottage, commercial or industrial property. It can run on natural and liquefied gas, so it is suitable for any facility, including those without a central gas supply.

Specifications

Rated thermal power (kW): 60;
Dimensions HxWxD (mm): 1204x830x726;
Boiler water volume (l): 31;
Without control system;
Weight (kg): 310;
Permissible excess operating pressure (bar): 4;

Delivery of goods in Moscow and the Moscow region is carried out by our own trucks within a pre-agreed timeframe and depends on the weight and category of your goods.

Please check with the manager for the cost of delivery of goods weighing more than 1500 kg.

* Free shipping products of the "Light" category are carried out when ordering from 1000 rubles.

We deliver orders from Monday to Saturday from 10:00 to 18:00. On the day of delivery, the driver will contact you 1.5 hours before arrival. If delivery at other times is convenient for you, please check the conditions with the manager. Delivery after 18:00 is charged separately. Every extra hour after 18:00 + 400 rubles to the delivery cost.

Pickup of goods is available by prior arrangement, after confirmation of receipt of the order at the pickup warehouse.

Please note that upon receipt of the goods legal entities a power of attorney is required for individuals– identification document.

DELIVERY TO THE REGIONS OF RUSSIA

Delivery to regions of Russia (except for Moscow and the Moscow region):

Delivery of orders to the regions is carried out through transport companies. We deliver and ship your order to the carrier. You can independently calculate the cost of delivering an order to your region; for this, almost every transport company has an online calculator on its official website. You need to enter certain values (weight and volume, number of seats), departure points and destinations!

Upon receipt of your order, you will need to pay the cost transport services. The cost of delivery to the transport company's warehouse is calculated according to local delivery rates.

Below are the websites of the most popular and reliable transport companies:

#	Transport companies
1	Business Line
2	PEC
3	ZhelDorExpedition
4	ZheldorAlliance
5	BaikalService
6	WHALE

Delivery can also be made to any other transport company according to your choice.

If for some reason you want us to send your order to another transport company, just tell us its coordinates, and we will send the goods as quickly as possible.

Delivery to the regions of the Russian Federation is made only after full prepayment of the cost of the purchased goods (receipt Money to the store's bank account).

Type of fuel

Heating boiler fuels are divided into gaseous, liquid, solid or matter burned to produce heat.
Among heating boilers, electric boilers can also be placed in a separate group - the most environmentally friendly of all types of boilers.
The cheapest type of fuel in Russia today is natural gas. Followed by solid fuel, electricity and diesel fuel.

Boilers designed to run on gas are usually configured to run on main gas - methane, but in the absence of main gas they can be converted to run on liquefied gas - which is a mixture of propane-butane.

Liquid fuels include diesel fuel, fuel oils, and synthetic oils. In everyday life, diesel fuel is used - diesel fuel. Today it is one of the most expensive types of fuel. As a rule, its use is resorted to in the absence of main gas and sufficient electric power for heating.

TO hard types fuels include firewood, coal, peat, pressed sawdust (pellets). These types of fuel are relatively cheap (depending on the specific conditions of the region).

type of instalation

The type of installation of heating boilers is divided into wall-mounted and floor-mounted.
The type of installation is determined by the design of the boilers, their power, and the type of fuel used.

IN Lately, gas and electric wall-mounted boilers have become widespread, the casing of which, as a rule, contains all the necessary elements of the “boiler room”: pump, expansion tank, safety group, automation, heat exchanger for hot water supply, etc.

Thermal power, kW

Rated thermal power is the power that can be removed from the boiler directly to heat the coolant, i.e. this power takes into account heat loss (efficiency).
Rated thermal power is measured in kilowatts (kW). The higher the efficiency of a heating boiler, the smaller the difference between its rated heat output and heat load.

The rated heat load of a heating boiler is its total power, excluding losses (efficiency), based on the heat of combustion of the fuel. Heat load is measured in kilowatts (kW).

The higher the efficiency of a heating boiler, the smaller the difference between its rated heat output and rated heat load.

Burner

A device that burns fuel to produce heat. The burners can be atmospheric gas, they are characterized by silent combustion and operate only on methane or propane and cannot be replaced with burners operating on other types of fuel. So-called pressurized burners are installed on boilers that use replaceable burners. For example: if gas will be supplied only in a year, then you can install the burner on diesel fuel and replace it with gas after connecting the gas.

Based on the type of burner, heating boilers are divided into atmospheric and inflatable (fan).

The advantages of atmospheric burners include their silent operation. They operate only on methane or propane and cannot be replaced with burners operating on other types of fuel.

The so-called forced-air burners are installed on floor standing boilers with the possibility of changing the burner. For example: if gas will be supplied only in a year, then you can install a diesel burner and replace it with a gas one when the gas is connected.
Modern wall-mounted boilers with inflatable burners allow combustion products to be removed using easily installed coaxial (pipe-in-pipe) chimneys, which allows significant savings on the construction of a classic chimney. IN wall-mounted boilers Gas inflatable burners cannot be replaced with liquid fuel ones.

Burner design

According to their design, the burners of heating boilers are divided into:

Single-stage, operating at constant power.
When using them, frequent switching on/off of the boiler occurs.
Two-stage burners typically provide 40% power in the first stage and full power in the second. Switching between the first and second stages occurs depending on the coolant temperature. As a rule, a correctly selected burner operates much less often at the second power stage than at the first.
Modulating burners operate over a wide power range (from 10 to 100%), reducing or increasing it as needed. Most gas wall-mounted boilers are equipped with modulating burners, which provides efficiency and additional comfort.

Average efficiency, %

Average efficiency (%) - the average efficiency of the boiler installation for the year.

Boiler water temperature, °C

Boiler water temperature (°C) - the temperature to which the coolant is heated in the boiler.

Automation included

Automation included - automatic electronic device to control the operating processes of boiler equipment, built into the design of the heating boiler or supplied with the boiler.
There are many various types automation. One of the important indicators is the number of heating system circuits that can be controlled by automation.

Installation

Boiler room installation includes:

Installing and securing the boiler in place;

Connecting the boiler to the central chimney or connecting a wall passage kit;

Connecting the boiler to the heating pipes;

Installation of protective equipment (safety group, expansion tank)

Installation of a coarse filter;

Installation of drain valve;

Connection of the make-up line;

If necessary, installation of a boiler pump, mixing pump, hydraulic separator, distribution manifold;

If necessary, partial assembly/disassembly of the boiler

Installation and connection of one heating group (each subsequent one - 5,000 rubles);

Filling the heating system with coolant;

Pressure testing of the heating system.

Water heater installation includes:

Installing and securing the water heater in place;

Installation of a direct loading line from the boiler with its own pump;

Connecting the water heater to the cold and hot water lines;

Installation of a recirculation line if necessary;

Installation of protective equipment (safety group, expansion tank);

Installation of drain valve;

Installation of shut-off valves and instrumentation;

If necessary, installation of a heat-insulating casing;

Filling the water supply system with water;

Filling the heat exchanger line with coolant;

Pressure testing of heating and water supply systems.

Commissioning

Commissioning works include:

Checking the correct installation of all equipment

Checking the system for leaks

Grounding check

Connecting the boiler to the gas main (diesel)

Installation and electrical installation of weather-compensated automation (if available, additional 6,000 rubles + 1,000 rubles for each additional circuit)

Setting up automation

Setting the combustion process

Checking and adjusting the boiler operation in all modes

Commissioning also includes detailed instructions to the persons responsible for the operation of the boiler plant.

After commissioning, the equipment is put under warranty.

Annual service

Service includes :

Diagnostics of boiler equipment

Topping up the system, pumping up expansion tanks (if necessary and if service taps are available)

Cleaning the combustion chamber of the boiler unit

Inspection and adjustment work on the burner device

Inspection and adjustment work on the automation system

Cleaning dirt filters

Prompt service for emergency calls from the Customer (on-site, diagnostics, repairs)

The cost of annual service includes the cost of the listed works and does not include the cost of spare parts, which are supplied free of charge under warranty or for an additional fee. Annual service is prerequisite maintaining warranty obligations.

Buderus gas boilers have proven themselves in the market with positive side a long time ago. They are produced using German technology, so the quality of the equipment produced remains at a high level. The company produces an extensive range of gas units with various characteristics.

Modern Buderus boilers have high efficiency and the ability to operate autonomously. The consumer can choose an option with any power for heating apartments, cottages, warehouses, enterprises, etc.

Consider gas Buderus boiler 60 kW. The Buderus Logano G234X-60 model has this power; it is designed for heating dachas and private houses with an area of up to 560 m². This device is not used in apartments, since it is equipped with an open combustion chamber. This unit has a sectional heat exchanger made of cast iron, which can last about 15 years. It is important that cast iron undergoes corrosion half as much as a steel element.

In one day, cast iron is corroded by a 10% solution of sulfuric acid in the amount of 680 g/m², and in distilled water - 5.51 g/m². For steel these figures are higher. Boilers with a cast iron heat exchanger are operated even with low temperatures. This unit runs on main gas, but if desired, you can also connect liquefied gas from a cylinder, for which you will need to purchase jets.

The boiler control system runs on electricity, so it is necessary to connect it to a 220 V electrical network. To protect the unit from voltage surges and extend its service life, it is recommended to install a stabilizer.

The presence of an open combustion chamber implies a visible flame, air is taken from the room, and smoke is removed through a stationary chimney.

This model of a 60 kW gas boiler is highly economical; most of its analogues consume more fuel under the same operating conditions. The maximum natural gas consumption of this model is 6.4 m3/hour, the highest consumption of liquefied fuel is 4.5 kg/hour. The boiler efficiency is 93%.

The unit has one circuit and works only for heating. It does not provide hot water. Below is a table of the main characteristics of buderus 60 kW

Logano G234X models. If necessary, the owner of the buderus 60 kW boiler will be able to expand the control system configuration. additional functions Distinctive Features:

this model are also
possibility of combination with various control systems of the Buderus program Logamatic 2101, Logamatic 2107, Logamatic 4211;
design with perfectly matched sections made of high-quality cast iron;
combination with adjacent water heater tanks Logalux ST and Logalux SU with a capacity of 150, 200 and 300 l using connecting pipelines;
fast and convenient installation;
easy conversion to other types of gas;
burner design without movable elements;
design with a black panel makes it easy to fit the unit into any style of room;

low noise.

Buderus Logano G234-60 is designed to operate reliably even at a gas pressure of 10 mbar. This model has the following control system capabilities: operation in weather-dependent mode, Internet connection, control of the recirculation line, solar system, mixing valve, 3-way tap.

How to equip a boiler room for the Buderus Logano G234-60 boiler is described in the video.

Buderus Logamax GB112-60
Another well-known model of a Buderus gas boiler with a power of 60 kW is the Logamax GB112-60. Unlike the previous model, it can be hung on the wall and has more compact dimensions. This model is capable of heating cottages or utility companies with a cascade connection of up to 470 kW.

This boiler model has the ability to smoothly change power from 39% to 100%. The unit has excellent efficiency from 98% to 109%, has a smooth steel heat exchanger made of finned tubes with a large heating area. However, this model does not include an expansion tank. You will have to select it yourself. The condensing boiler can be equipped with a control system and water heater tanks Logalux HC70/110, S120.:
do not use or store chlorine-containing cleaning products in the room where the boiler is located;
the air should not contain aggressive substances, for example, fluorine and chlorine compounds.
Harmful substances in the air affect corrosion processes.
If in the room where the gas boiler is located, construction works, the following measures should be taken:
turn off and cover the unit;
Before starting up the device, do not forget to clean the dusty burner.
Water quality also plays a significant role in extending the life of the unit, as well as increasing the efficiency, reliability and performance of the heating system. If the level of calcium in the water used is high, lime deposits appear on the surface of the heat exchanger, preventing the water from heating. As a result, the temperature of the heat exchanger increases and thermal loads appear.
If the water is too hard, you need to install a filter device at the inlet.

To obtain the required temperature in the room, the thermostatic valves must be fully opened. If the optimal heat level is not reached for a long time, set the temperature on the regulator even higher.

Note! If you frequently add water to the heating system, it will fail faster due to corrosion and scale formation.

If the gas boiler is temporarily not in use, the coolant is drained from the system.
Boiler maintenance and cleaning must be carried out once a year. In this case, it is necessary to check the functionality of the entire system. Maintenance, installation, gas and power connections, and the first start-up of the Buderus 60 kW unit must be performed only by a specialist from a specialized enterprise that has permission to carry out such work.

Exhaust gas monitoring device

The boiler can be equipped with an exhaust gas monitoring system, for example, when operating the unit in a roof boiler room. This device turns off the gas supply if the fuel goes into the room where the unit is installed, as a result of which the burner turns off. After 15 minutes it turns on again. If the device operates too often, it means there is a malfunction in the chimney pipe. Then you should call a specialist.

What to do if the burner malfunctions?

If any malfunction occurs in the operation of the burner, the signal button for suppressing boiler interference lights up. In this case, system faults are displayed on the display. To continue operating the unit, press the burner suppression button and try to light it again. If the burner does not turn on after several attempts, call a specialist.

Note! You can press the noise suppression button no more than three times. If you do this more often, you can cause damage to the burner ignition transformer.

When operating Buderus gas boilers with a power of 60 kW, they should be located in the basement, attic or in specially equipped boiler rooms. Such units are not equipped with a circuit for supplying hot water, but you can always purchase additional components and use them to obtain a system that meets your needs.